Running-in process and speed of hardened stainless steel ball

- May 20, 2019-

The hardened stainless steel ball needs to be used according to the corresponding method in the process of application. The increasing proportion of the ball mill ball diameter depends on the diameter of the ball mill, the hardness of the ore, the ore particle size of the goal mill, the hardness of the steel ball, and the ball mill. The speed is equal to the factor to determine. When the type of ball mill is determined, the speed of the ball mill is set. The hard cosmetic stainless steel ball of the ore is measurable, the ore particle size of the scoring mill,

The newly installed ball mill has a running-in process. In the process of running the hardened stainless steel ball, the amount of steel ball increases for the first time, accounting for 80% of the maximum ball load of the ball mill. The increased share of the steel ball can be measured by the steel ball scale (Φ120mm). Φ100mm, Φ80mm, Φ60mm, Φ40mm) increase in size. The increased weight of the steel ball is based on the quality of the steel ball, the quality of the steel ball, and the increase in ore consumption. It is best to use a new type of ball-milled steel ball. The best steel ball increase is calculated according to the amount of ore processed per ton (ie 0.8kg per ton of ore). The average steel ball needs to process one ton of ore (1kg-1.2kg).

The useful length of the ball mill hardened stainless steel ball is based on the useful length of the ball mill, whether it is equipped with a roller press, the size of the feed, the lining and structure used, the desired fineness of the sieve and the ratio of the table and the number of rotations. Generally, the steel ball grading is 120mm, 100mm, 80mm, 40mm. If a high chrome ball is used, the manufacturer must be required to participate in the rare earth during production. www.wxjnsteelball.com